Note:
Hard resetting the device will cause the device to be reset back to its original factory default settings and all data and installed programs will be lost. Disconnect the unit from AC power. Use your stylus when it states below, “Press the Reset Button”.
ACER N50
Hold down the today and the mail buttons. Simultaneously press the reset button.
ACER N300
Hold down the HOME and the IN BOX buttons. Simultaneously press the reset button for about 2 seconds.
Asus A632 - A636
Hold down the power button and press in the reset button for about 6 seconds.
BenQ P50 - BenQ/Siemens P51
Hold down the power button and press in the reset button with your stylus for about 6 seconds. Once the screen fades, press the power button again to activate the unit.
Dell Axim X3 - X3i - X30
Press and hold the power button while you press the reset button for about 6 seconds. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory. Then press the Contacts button. To cancel, press the Mail button.
Dell Axim x50 - x50v - x51 - x51v
Turn the device ON. Press and hold the power button while you press the reset button for about 6 seconds. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory. Then press the Contacts button. To cancel, press the Mail button.
ETEN M500
Hold down the power button and then press the reset button for about 6 seconds.
ETEN M600
Hold down the power button and the (CTRL - ALT!) button simultaneously and then press the reset button for about 2 seconds. Then release all buttons at the same time.
Fujitsu Siemens Loox N560
Press & hold the power & calender button, then press & release the reset button. Continue to hold the power & calender buttons for a few seconds. When you release the power & calender buttons the unit should beep & then reset.
HP iPAQ h1900 Series (1910 - 1915 - 1930 - 1935 - 1940 - 1945) - HP iPAQ h6300 Series (6310 - 6315)
Hold down the power button and press the reset button about 6 seconds.
HP iPAQ h2000 Series (2210 - 2215)
Hold down the Calendar and iTask buttons, and then press the reset button on the for about 6 seconds. After the screen fades, release all buttons. You can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset you unit. Now you can connect iPAQ to the AC power or press the reset button again with your stylus.
HP iPAQ h5000 Series (5450 - 5550 - 5555) - HP iPAQ h3800 Series (3830 - 3835 - 3850 - 3855 - 3870 - 3875)
Hold down the calendar and iTask buttons, and then press the reset button for about 6 seconds. After the screen fades, you can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset your unit. Now you can connect the iPAQ to the AC power or press the reset button again with your stylus.
HP iPAQ hw6500 Mobile Messenger Series (6510 - 6515), iPAQ hx2000 Series (2410 - 2415 - 2710 - 2715) and HP iPAQ hx4700 - hx4705
Hold down the calendar and iTask buttons, and then press the reset button for about 6 seconds. The Pocket PC should reset and power back on. If the device does not power back on, make sure that the battery lock switch is set to the left.
HP rw6828 - O2 XDA Atom - O2 XDA Atom Pure
Press the reset button with your stylus, then press the power ON/OFF button at the same time. A confirmation screen should ask you to press the green call and the red end call buttons together.
HP iPAQ rz1700 Series (1710 - 1715)
Hold the Mobile Media and the Today buttons, then press reset button for about 4 seconds. To confirm, press the power button. If the device does not turn on then you have successfully hard reset you device. Now you can connect the iPAQ to the AC power or press the reset button again with your stylus.
HP iPAQ rx3115 - rx3715
Hold down on the far left (Mobile Media and the iTask buttons then press the reset button for about 6 seconds.
HTC Apache - Sprint PPC-6700 - Verizon XV6700
Hold both the softkeys (buttons with “-“ on them), push the reset button once. Release just the reset button while still holding onto the softkeys. A confirmation screen should appear asking you if you want to reset all data. Press Y to reset, and N to cancel.
HTC Blue Angel - i-mate PDA2K - Siemens SX66 - T-Mobile MDA III
While holding down the power button press in on the reset button (reset hole) with your stylus for about 6 seconds.
HTC Magician - Dopod 818 - O2 xda II mini - i-mate JAM - QTek S100 - T-Mobile MDA Compact
Hold down the power button and press the reset button for about 6 seconds.
HTC Trinity - HTC P3600 - Dopod D810 - Dopod CHT 9100 - Orange SPV M700 - Vodafone VPA compact GPS
Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot.
HTC Universal - T-Mobile MDA IV - Vodafone VDA IV - O2 XDA Exec - i-mate JasJar - QTek 9000 Orange - SPV M5000
Press the two soft keys together then pressing the reset button on the back of the unit. A confirmation screen should appear that reads, "Press 0 to reset to factory defaults or X to exit." Press ZERO to confirm the factory reset.
HTC Wallaby - O2 XDA - QTek 1010 - Siemens SX56 - T-Mobile MDA
Hold down the power button and press the reset button for about 6 seconds.
HTC Wizard - Cingular 8125 - i-mate K-JAM - T-Mobile MDA
Hold the Comm manager button and the Voice Command button, the press the reset button once. Hold the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To reset, press the green send key.
Another is from original manual:
After pressing the reset button with the stylus you must CONTINUE TO HOLD the Comm Manager and Voice Command buttons until you see a message asking you to press the send button (the green phone) to perform a hard reset. Following this, wait patiently and the K-JAM should eventually boot into Windows Mobile.
Mitac Mio 168
On the back of the unit, slide the battery switch to OFF. After about 1 minute, slide the battery switch back to the ON position. The unit will restart with the default settings.
Mitac Mio A201
Remove the battery cover. Use the stylus to slide the battery switch to OFF. After about 1 minute, slide the battery switch back to the ON position. Install the battery and immediately press the Record Button. The screen should show "cold boot" and "loading......" Replace the battery cover.
Mitac Mio A701
The device must be turned off. Press and hold the down volume button and the end button at the same time. Release both buttons when the device vibrates. The unit will turn on automatically and the Setup Wizard will be displayed. Follow the instructions to complete the hard reset process.
Palm Treo 700w
Hold the Power-End button and then press the reset button. When the confirmation screen asks you “Do you want to erase all data?”, you can release the Power-End button and press the up button on the directional pad to confirm the hard reset.
Toshiba e310 - e330 - e335 - e350 - e355 - e400 - e405 - e570 - e740 - e750 - e755 - e800 - e805
Device should be off. Hold the power button and press the reset button then release the power button. When the screen appears release the reset button.
Viewsonic V36 - V37
Device should be off. Slide the grey latch on the right hand side of the unit to open the battery compartment. Slide the short grey switch above the battery bay to the OFF position and remove the battery. After a brief few seconds, insert the battery. Then slide the short grey switch above the battery bay to the ON position. Now, replace the cover and slide the grey latch back to the lock position. Turn unit ON.
Xda Orbit
Press the two soft keys together then press the reset button on the side of the unit. A confirmation screen should appear that reads, "Press 0 to reset to factory defaults or X to exit." Press ZERO to confirm the factory reset.
FSC LOOX T810/T830
Slide off the battery cover from the Pocket PC. At the same time press and hold the End Call button and press the tip of the stylus pen into the soft reset opening. Release the end button as soon as a list of possible options is displayed on the screen. Select Skip if you would like to perform a normal cold start. To restore the Pocket PC to the factory defaults select Factory Defaults.
MATE PDAL
To hard reset, hold down the two soft key buttons directly below the screen, and press the reset pin.
You will be presented with a menu saying 'press R to reset, X to exit'
Phone must be powered on without sim card
Trin 100
Hard reset key have try and test
should work 100 %
Also the Camera & Power button with soft reset doesnt go to bootloader, just make soft-reset, aswell as the Hard-Reset by the pad-buttons doesn't work.
When you press the stylus in the reset hole - keep pressing the buttons until you see the bootloader
Dopod 838
Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device.
Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press R to reset, X to exit', if you press R Your device will be set back to factory default settings.
(The L/R soft keys are the "--" keys just up the start and OK buttons)
Htc hera100
User lock: hold down 2 softkey below screen and push reset with stylus after read black screen press green button.
Dopod c800 /htcc800/hera100 here
To perform a hard reset
1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the middle left side of your device.
2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
“This operation will delete all your personal data, and reset all settings to manufacturer default.
Press Send to restore manufacturer default, or press other keys to cancel.”
3. Release the two SOFT KEYs, and then press the button on your device. Warning! Your device will be set back to factory default settings.
Wiza100 dopod838 hardreset key here(non 3g)
Hard reset : holding the comm manager and voice button and pressing the reset button with the stylus.
O2 - ST20F freez on O2
1. Turn off phone.
2. Press hold & left + right soft menu key
3. While still holding left + right soft menu key then on/off button & release.
4. Keep left + right soft key pressed until you see the message:
"Press 0 to restore fatory setting, other key to quit"
5. Press 0 and wait for the phone to boot up, the restoring of factory default will begin and will ask to reboot your phone when done.
HTC s710
Hard reset
*Turn off your phone,
* then press both *SOFT KEYS* and *
*After moment release both soft keys.
*On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.
HTC EXCA 100
Hard Reset ....
Step One:
Preform power down *Hold the power button* Till the phone is 100% powered down and all you see is a black screen
*keep in mind if your device is plugged into a power source or computer link this will not work!*
Step Two:
(Use both hands while doing this it will be much easier!)
Place 1 finger on each of the Soft keys.
Step Three:
Press the power Button and hold for no more than 2 sec well holding the two soft keys (do not hold the power button till the phone turns on) ONLY PRESS THE POWER BUTTON DO NOT TURN THE PHONE ON. After pressing the power key keep your fingers on the Two Soft keys until you see a the phone turn on and a black screen come up with white writing. Once you see this screen Press the Green Send key and there you go you have just performed a hard reset on the T-Mobile dash without using the settings screen on the phone.
TOSHIBA G500 HARD RESET WAY+KEY
WAY=
tap start > setting
tap the system tab
tap master clear
enter the confirmation code in the code : field
tap the reset button to reinitialise you phone
your phoen will restart after it has been reset
KEY=
TURN pda off press and hold the green button on the slide+BS(Del)+Power until the light go on. Then a red screen apears answering if you want a clean boot (y/n) press Y and the pda resets when you power on again it will install the windows as new.
Glofish x500
1. Press the power button.
2. Press the SR button and release both power and SR button, right after this, press on the "END Call" red button,
3. keep holding the red button until you see a white message with Return to factory defaults.
4. press the Left Soft key for 3 seconds untill the yes is selected
HTC P4550 / HTC TyTN II / Orange & HTC TyTN II / Vodafone VPA Compact V / Vodafone v1
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
XDA II : O2 XDA EXEC
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Posts
0 komentar
Post a Comment