www.handphone-repair.co.cc

Mx Key v3.3 revision 1.0, Public-Release

2009-11-25T10:33:00.002+07:00

#Major update
- MAIN
Improved, Application Signing system
~ client time will be checked before signatures generation to avoid duplicate error request.
~ date-time issue bug on server side fixed.
~ no messages will be displayed if signatures invalid when working in FREE module(siemens).
Added, Server status info on server check
~ ping check removed, so there will be no more firewall problem.
Redesigned, Modules Manager page
~ This will make the posibility to update single module at future updates.
Check for daily update re-enabled.
~ application will check update once a day and will be displayed in tooltips when new update found.
- NK
Added, BB5 RAPIDO STN8815(N96) usb flashing(Dead Usb also possible)
Fixed, DCT4PLUS ASIC 0x3168 patch unlock and imei changes (2630 v52.70, 2680 v06,80)
Fixed, BB5 Flashing (partitioning bug)
Fixed, Fast flashing bug when using JAF box.
Added, PM308,1 backup on 'BB5 SW downgrade fix'

Other modules recompiled for major api changes.

Download here.

LG Hardware Solution

2009-10-15T11:48:00.001+07:00

Download Here

SonyEricsson_mic_solution_exe.

2009-10-13T17:51:00.004+07:00

Download here

1661 full Solution one pack

2009-10-13T17:47:00.001+07:00

Download here

v3.2 revision 5.4, Public-Release #Minor update

2009-10-13T17:21:00.001+07:00

Refixed, Windows Vista & Windows 7 compability.

- NK
Added, BB5 'Restore SIMLOCK' from '*SIMLOCK.back' or '*.PM' or '*.RPL'
~ The button located at 'IMEI & Security'->'IMEI Rebuild'->'Restore SIMLOCK'
Fixed, DCT4 unknown flash bug(BUS check)
Fixed, DCT4 CS repair when phone could not go into LOCAL MODE
Refixed, DCT4 bootstrap for UFS interface
Fake Progressbar for BB5 flash erase reenabled.

- VCOM
Recompiled PK83.bin for new api compability

Download here

v3.2 revision 5.2, Public-Release

2009-10-05T10:49:00.001+07:00

MXKEY DCT4PLUS SP UNLOCK and Imei Changes for ASIC 0x3168 - v3 revision 5.2
02 October 2009

v3.2 revision 5.2, Public-Release

MAIN
- License #0 needs to be activated (activation is FREE) to load module.

NK
- Added, DCT4PLUS ASIC 0x3168 standalone 'on the fly' patch for SP UNLOCK and Imei Changes
~ This feature need License #1 to be activated (activation is FREE)

- Added, Low Level format before CNT write

- Fixed, Image Download 'in background' hang

- BB5 Secure Storage Validity now support PA_SL3(unlocked) phones

- Fixed, WD2(PPM) flashing using UFS

- Many Minor bug fixed.

Download from:
MXKEY- Official mirror
http://rapidshare.com/users/P5JHS5
also available in support area and download page

Public discussion for this update in this thread:
http://forum.gsmhosting.com/vbb/showthread.php?t=834728

BR,
Manole
GSM: +8613077861111
ICQ: 66-11-11
YM: manole4000
MSN: manole@manole.ro
SONORK: 100.88888
Web Page: http://www.manole.ro

MX Key v3.2 revision 3.2, Public-Release

2009-08-10T09:50:00.001+07:00

Whats new:

- Application core module loader routine changed

- MAIN
Minor bug fix

- NK
JAF BOX stability and compatibility improved
(This will also fix problem with flash dead,random stops/hang when using JAF BOX)

Added, Bus Check routine for 'Nokia USB ROM'
(Useful for 'NORMAL' phones which could not connect to USB due to phone lock or something else)
(After successful flash bus check phone will reboot to local mode, so you can do fbus operation such as: reset user code/factory reset)

Added, Wlan settings in RF/BB tab

Fixed, Keypad test start bug

Fixed, Sometimes hang after flash erase

Wlan settings also included when backing up ProgData

Download link:
http://rapidshare.com/files/26440431...3.2_rev3.2.exe

PS: Just discovered Krombo identity and will be made public soon.

SETool3 Script Maker New Version Released

2009-06-17T09:11:00.005+07:00

You can Download this soft with this Feature

1)Increase Sound Volume In This Models:
K800,W850,W810,K750,W700,.....

2)Remove Shutter and Focus Sound in All Supported Model

3)Increase SMS Storage in This Models
W850,K800,.....

4)Increase Camera Drivers From 7 to 52 Drivers

5)Change Display Driver in This Models:
W800,K750,W700

6)Added GDFS Scripts(Active AMR,Battery Menu,.....)

Download here.

v3.2 revision 1.3, Public-Release

2009-06-13T15:19:00.001+07:00

#Patch update
- MAIN
Improved, privilege adjustment
; hopefully will solve not starts problem ?!
; So far tested with XP XP2(OEM), Vista Ultimate(NOT OEM), Vista Ultimate SP1 (OEM)
- NK
BB5 SIMLOCK SL3 Structure upload from RPL backup added.
------------------------------------
v3.2 revision 1.2, Public-Release
#Patch update
- NK
Added, Support for BB5 SIMLOCK SL3 Structure upload
Fixed, WD2 CBUS Loader parse for correct BT flashing
------------------------------------
v3.2 revision 1.1, Public-Release
#Patch update
- NK
Fixed, Online Logger not shown when 'Imei changes' disabled.
Fixed, BB5 Restore Imei+Write RPL

Download here

SpiderMan Box update

2009-05-20T22:32:00.001+07:00

Program version V2.55
Updates:
*v2.55
a. MTK6225/MTK6226/MTK6223 New V09 version decrypt
algo added!!!
b. MTK repair IMEI by META added!
c. Box Firmware update to 2.54

Download:
From Support site

From Rapid

Mxkey Update

2009-05-20T21:47:00.002+07:00

Someone who have trouble with flashing BB5
perhaps this Flash Update can help

Flash update for bb5... for using in mxkey and other flasher..

Download here.

Nokia Universal Cables User Manual

2009-05-18T13:37:00.000+07:00

Download here

Blackberry Theme Creator

2009-05-15T19:29:00.003+07:00

* A full range of vector illustration and animation tools
* Customize your BlackBerry Themes, including
o home screen icons
o Theme backgrounds and fonts
o Home Screens
o Lock Screens
o Menu Styles
o Animation
* Use existing Adobe Photoshop, Illustrator and Flash files
* Test and debug your designs on the desktop using BlackBerry simulators
* Optimize your graphics for delivery and use on wireless devices
* Easy to use interface

Download here
PART 1
PART 2
PART 3

Pass: BiOhAzArD79

Mtk FlashTool v3.852.0

2009-05-15T19:03:00.001+07:00

New Features

Enhancements:
1. [FOTA] Dual Endmark for lowering assertion ratio while power lossing
2. [NAND Driver] 1 bit-tolerance for identifying bad block mark
================== FlashTool v3.0848 (2008/11/26) ==================
Bug fixes:
1. [Memory Verification] Fix a boundary condition issue when external ram size equals to the max size of EMI CS.
2. [NFB MBA] If E-NFB is changed, update image list in partial download of NFB MBA

New features:
1. [NFB FOTA] Support FOTA feature in NFB system.
2. Support New NOR Flash:
[TOSHIBA] TC58FYM8T7D
[TOSHIBA] TC58FYM8B7D
[SAMSUNG] K5L2833ATA
[ST] M58WR064KT
[NUMONYX] M36C0W6050T0
3. Support New NAND Flash:
[MICRON] MT29F1G08ABB
[MICRON] MT29F1G16ABB
Enhancements:
1. [MT6238] Improve DTCM yield rate
2. [MT6235] Improve DTCM yield rate
================== FlashTool v3.0844 (2008/11/03) ==================
Bug fixes:
N/A

New features:
1. Add NOR Flash:
[TOSHIBA] TC58FVM7TDD
[TOSHIBA] TC58FVM7BDD
2. Add NAND Flash:
[SAMSUNG] K5E1257ACM
[SAMSUNG] K5E1G12ACF
[Micron] MT29F2G16ABD
[HYNIX] HYD0SFG0MF1P
[HYNIX] H8BCS0CG0MBR
[HYNIX] HYD0SQG0MF1P
[HYNIX] H8BCS0PG0MBP
[TOSHIBA] TC58NYG0S8C
[ST] ST512R3A
[ST] ST512R4A

Download here.

New Nokia Hardware Solution 1110 1200 1208 1209 ETC

2009-05-15T11:38:00.003+07:00

Download here.

Nokia Hard Library v7.0

2009-05-14T09:30:00.002+07:00

Download here:
PART 1

PART 2

PART 3

PART 4

Hard Library All in One

2009-05-05T10:10:00.001+07:00

Download here!

UFC Pin Out Selector v.3 by Linux

2009-04-25T12:26:00.003+07:00

Download here!

SonyEricsson A2 platform based free Unlocker

2009-04-25T12:02:00.004+07:00

Supported Phones

Aerix supports A2 platform based Sony Ericsson phones:

C510	C702	C901	C902
C905	G502	G705	K630
K850	K858	T700	TM506
W595	W705	W715	W760
W902	W908	W910	W890
Z750 V640	Z7 K660	W980	C903

C51 0, C702, C901, C902, C903, C905
G905, G705
K630, K660, K850, K858
T700, TM506
V640
W595, W705, W715, W760, W890, W902, W908, W910, W980
Z750, Z770, Z780

Procedure:

Use DCU-60 / 65 cable USB...
Boot at erom by pressing 2 or 5.
Press Unlock...
That's it ENJOY !

Register HERE!

Download HERE!

HOT: Free unlock I-Phone 3G 2.2.1

2009-04-09T21:09:00.004+07:00

What we Need :
1- universal sim
2- Iphone os 3 from here
3- i-tunes 8.1 latest version from here

Way to unlock :

1- Connect phone to i-tunes in recovery and make restore firmware 3
2- Wait untel phone successfully updated now the base band is updated to 04.20.01
3- Connect phone to i-tunes again but this time in DFU mode in order to downgrade to firmware 2.2
4- Now connect phone to QuickPwn-225-2 and make jailbreak and follow those steps

5- Now go to setting - General - Network and make this option :
Enable 3G : OFF
Data Roamin : ON

6- Now inset your sim card with universal sim and restart your i-phone

Enjoy your unlocked I-Phone

Br
gsmlocker

New nokia odm CCS12R050

2009-04-05T03:36:00.000+07:00

Current supported Products and Product SW
RH-79 N1215;
RH-96 N1315;
RM-211 N6066;
RM-218 N6088;
RM-219 N7088;
RH-103 N1265;
RH-104 N1325;
RM-307 N2505;
RH-107 N2135;

Add/Change Features
[RH-104] New transceiver code, IQI 0580462, 0580463
[RH-104] Type label update - Nokia_Generic_China_600(update).txt
[RM-307] Type label update - Nokia_Generic_China_600(update).txt

Download here

Nokia Cdma Hardware ver 2.1

2009-04-05T00:19:00.006+07:00

Download here!

MxKey Update

2009-03-24T20:30:00.002+07:00

v3.1 Beta16, Public-Release

Changes:
- MAIN
Removed old card protocol(MXKEY REV 1.X/ROCKEY6), for this release only MXKEY REV 2.X card supported
minor bug fixes
- NK
Fixed, loader issue
Added, single phones setting (VPP,RX2, Fast checkbox now saved to config for each phone)
Added, BB5 No TP Unlocker, Dejan RAP3GV2 unlocker removed.
Fixed, `highlight market` bug
minor bug fixes
- CCS
Improved, communication. Dead phones full flashing now working without errors

Download area for MXKEY users:

Download here!!

SE Sim Solution In One exe

2009-03-24T20:05:00.001+07:00

Download here!

BB5 Local Mode Solution

2009-03-23T21:46:00.001+07:00

Download here!!

HWK Suite minor setup v02.08.003

2009-03-23T08:06:00.002+07:00

Download here!

Service Tools RM-430 Nokia 1508i

2009-03-23T07:29:00.003+07:00

Download here!!

Bitpim v1.0.6

2009-03-21T17:02:00.003+07:00

Manage data on CDMA phones from LG, Samsung, Sanyo and others BitPim is a program that allows you to view and manipulate data on many CDMA phones from LG, Samsung, Sanyo and other manufacturers. This includes the PhoneBook, Calendar, WallPapers, RingTones (functionality varies by phone) and the Filesystem for most Qualcomm CDMA chipset based phones.

Download here!

LG Repair Guide exe

2009-03-20T10:18:00.000+07:00

Download here!

Nokia and China Phone pinouts all in one

2009-03-18T15:04:00.003+07:00

Download here!

Samsung Keypad Solution

2009-03-18T15:00:00.001+07:00

Download here!

Nokia charging ways 2009

2009-03-18T13:01:00.002+07:00

Download here!

Samsung Rocker 1.06g Full Free

2009-03-15T19:04:00.004+07:00

Download here!

Cruiser Tutorial Video in One exe

2009-03-04T20:57:00.000+07:00

Download here!

FREE SETOOL FULL WORKSTATION V2 Updated

2009-03-04T20:21:00.000+07:00

It is what it claims to be a workstation, now more no less.

Hopefully the ones that use these workstations will learn to work better with setools and have technical assistance for simple questions, without running all around the internet and different forums

Besides the new information added to the SETOOL workstation v2 now you can run the Setool programs from any directory. By doing update links.

DOWNLOAD LINK : SE-TOOL_Work_Station_V2.rar

Free Flasher + Flash l770 infineon

2009-03-03T18:55:00.000+07:00

*.*.* world first flash l770 infineon *.*.*

WORLD FIRST FLASH L770 INFINEON WITHOUT BOX
1. UNZIP AND RUN FLASHTOOL_E2
2. ENTER FOLDER FILE.FLS
3. INSSTALL DRIVER FROM FOLDER FLASHTOOL_E2
4. Set "infineon usb driver " in setting
5. Click start & next start
6. Holding button "*" from phone and put cable usb
5. And wait finish progresse

HERE IS WORKING FLASHTOOL SPECIAL FOR L770

Download here!

Nokia Flash Update Package v008.49.019

2009-03-03T17:01:00.000+07:00

Introduction

New release 008.49.19 of flash update package files is available

New features and error corrections:

- No new features

- Stability improvements to USB flashing

Extract file in folder Flash.

Download here!

2009-03-03T14:15:00.000+07:00

China mobile repair guide v1.0 by FasGSM
Download here!

Blackberry 8xxx unlocker Free

2009-03-02T12:44:00.000+07:00

TUTORIAL:

1. Start the Unlocker (wait vor programmstart of MML Multiloader)

2. Connect your Blackberry to Datacable and wait for driver installing.

3. Click the "PHONE INFO" button.

4. Blackberry Unlocker show you now if SFI files for Restore are aviable or not.

If no SFI file aviable, Reflashing after unlock its needed.

5. Now Click the "RESTART" button (you must click the restart button after every new move (read info, unlock)

6. DisConnect and ReConnect your Blackberry and wait for connection.

7. Now click the "UNLOCK" button, after some time a massage box comes up and tells you that the unlock

Has worked! Click OK or ENTER to start the Restore Process.

8. Wait till the Processbar show a red text with "DONE!"

Your Blackberry is now unlocked and Finsihed!

9. Disconnect and test

-----------------------------------------------------

+ Link download software

BLACKBERRY_UNLOCKER_HARI.part1

BLACKBERRY_UNLOCKER_HARI.part2

BLACKBERRY_UNLOCKER_HARI.part3

BLACKBERRY_UNLOCKER_HARI.part4

BLACKBERRY_UNLOCKER_HARI.part5

BLACKBERRY_UNLOCKER_HARI.part6

BLACKBERRY_UNLOCKER_HARIpart7

P/s: I know forums have this topic, but the links are difficult to download. this topic, the software is stored easily download.Here, I want you to record your results when using this software

thank you all very much

B.R.,

mobileEX image data v3.0

2009-02-26T18:53:00.000+07:00

mobileEX_image_data_v3.0
Download here!
Pass: nongstar

Release MX-Key v3.15

2009-02-26T13:40:00.000+07:00

v3.0 Beta15 RC, Public-Release
- MAIN
help file updated
minor bug fixes
- NK
DCTL/LINDA fully implemented with Custom erase to fix old 9210i CS problem
Fixed, Image DL (server communication protocol changed)
Fixed, BB5 custom certificate backup
Fixed, New PP files manual upload
Improved, SUPERDONGLE auth (show the detailed error msg)
Improved, User code reset for BB5 phones
minor bug fixes

Download here!

China Mobiles Hardware Repair Guide V2.0

2009-02-19T18:22:00.000+07:00

Download here

New RSD Lite 4.5.3

2009-02-16T10:16:00.000+07:00

Original Motorola Software flashing tools, RSD Lite v4.5.3 Multi Flash

Download here

Sony Ericsson repair light display exe 2009

2009-02-13T01:42:00.000+07:00

Download here!

UFS HWK v2.08.02

2009-02-10T08:53:00.000+07:00

Release Date: 10/02/2009

The Official release is ready in our download area http://sarunasoftware.com.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.8.2
----------------------

1. Flash Update Pack problems Fixed.
2. New BB5 products:
RM-247,RM-297,RM-333,RM-334,RM-335,RM-348,RM-349,RM-350,RM-356,
RM-398,RM-399,RM-415,RM-427,RM-428,RM-429,RM-437,RM-449,RM-450,
RM-472,RM-493,RM-494
(N96-1,N96-5,N85-1,N85-3,N85-5,N79-1,N79-3,N79-5,5800d-1,7510a,7510a-b,
6600s,5800,5800,3610a,E63-1,E63-2,E63-3,N96-3,E71-5,E66-5)
3. DC4 Flash Chip 0020883C Fixed.
4. New DCT4 products:
RH-111,RH-112,RH-113,RM-438,RM-439,RM-490,RM-500
(1202-2,1202-2b,7100s-2,7100s-2b,1680c-2b,2680s-2b)
5. New DCT4+ UNL versions support:
1200(RH-99 v5.71,v5.80) 1202(RH-112 v2.80) 1208(RH-105 v5.71,v5.80)
1650(RM-305 v5.71,v5.80)
6. User interface localisation.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

LG_GSM V 2.0.8.2
-----------------

1. Infineon GB100,GB105,GB106,KG285,KG288,KP100,KP105,KP106,KP 107
support added. (BIN bundle files open as FLS)
2. Read/Write for Infineon EGOLD Voice added.
3. Auto Backup for Infineon EGOLD Voice added.
4. ADI KF240, KF300
support added. (BIN bundle files open as Code)
Cable as for KP130,KP210,KP260
5. QualComm models introduced.

SAMs V 2.0.8.2
---------------

TRIDENT
B270 added (DUNL,IM,FL)
TRIDENT VISION
J610 MSL corrected (DUNL,IM)
E215L,M320L added (CUNL,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
M140 added (DUNL,IM,FL,SECT)
SWIFT
J706,L708E added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130,B130S,B130T fixed flashing for HW 0.600
QUALCOMM
ENUMERATION NOT EXIST: 20 bug fixed (up to COM256 supported)
Fixed flashing for OEMSBL V5.32 and higher (M7500,M8800)
UNLOCK and UNFREEZE added for these models:
F480F,M7500(Armani),M8800(Pixon),U700,U700B,U708,U 800,U800F
(Use [QCDI Info] button to readout keys)
S7220,S7350 added.

Samsung / Qualcomm USB Drivers can be downloaded here:-
http://rapidshare.com/files/19063817...SB_Drivers.zip

We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.

Many thanks to all those who have supported us!!!

Odia.

BB5 UFS Unlocking by GSM-Egypt

2009-02-05T09:56:00.000+07:00

Download here

FULL PKEY Emulator v5 JAF-S_v_1_00

2009-02-01T00:10:00.000+07:00

JAF + Pkey Free:
- NO PKEY required - as usual !!!
- Work with all JAF original setups (1.98.62 too).
- Work with JAF addon BB5 NO TP Unlocker by Cinek 1.03
- JAF-S_v_1_00 free
- Can access JAF support area (all servers, Raskal servers, Thomas servers)!
- Allow manual selection of emulated PKEY kind (Raskal PKEY, Thomas PKEY)
- For PKEY emulation used applets from original JAF 1.98.62

Download:
Emulator v5
Pkey Access

SonyEricsson Testpoint Collection

2009-01-31T12:17:00.000+07:00

Download here!

Cruiser Suite All-In-One installer v1.16 available

2009-01-26T11:47:00.000+07:00

Hello,

new update of CruiserSuite All-In-One installer has just been released. It can be found in our Downloads section.

Cruiser Suite All-In-One installer v1.16 contains all applications (latest versions up to date: 21/01/2009), drivers of Cruiser Suite and will install everything all at once into product group Cruiser Suite.

Enjoy !

author: Cruiser Suite Team | 1/22/2009 1:42:00 PM

BB5-DCT4_Charging Solution

2009-01-23T22:34:00.000+07:00

Download here!

Jaf 1.98.62 setup Crack

2009-01-21T16:54:00.000+07:00

Download Main Setup

Download Crack

HWK update

2009-01-19T10:39:00.000+07:00

HWK Suite Minor v02.08.001

Download here!

Imei tool for super new MTK CPU

2009-01-19T10:27:00.000+07:00

How use it?
1. Open the flash tool,click the configuration

2. After,click the "Enter configuration Mode"input the password is "MIADM"
setting the comport and imei and other info.

3. Click the "operation"click the click ,hope down the power key.

Can i use it by super doctor

Can use this by every box.

Download here!

MTK-Filecode Easy

2009-01-19T10:01:00.000+07:00

Use this tools for chek file flash china phones detail.

Download here!

RadioComm v11.7.4

2009-01-12T17:21:00.001+07:00

Download here!

BB5 Signal Master

2009-01-12T17:18:00.001+07:00

Download here!

New DCTX BB5King v2.0.8.1

2009-01-10T08:51:00.000+07:00

Download here!

NEW BIG NOKIA REPAIR PACK

2009-01-05T08:34:00.000+07:00

New nokia repair pack 1751 files 147MB all in one

Download here!
Password: Nokia

Point of view

Compatible LCD for All Phones

2008-12-31T23:17:00.001+07:00

Download here!

BB5 Charging Not Supported

2008-12-31T08:55:00.000+07:00

Download here!

JAF PKEY Expansion

2008-12-30T08:11:00.000+07:00

Make Card life counter: 100% Forever (no more update PKEY).
Change PKEY SERIAL NUMBER to ANY value (can login to all support servers).

Only use tool for Pkey damage or no update again.

Download here!

Moto Tools 2009 all in 1

2008-12-29T09:17:00.000+07:00

Download here!

BB5 Lock Code Reader & Unlock Counter Resetter v.0.2

2008-12-28T10:38:00.000+07:00

How To Use This FREE Software:
1. Read the full PM of your BB5 phone.
2. Use any box capable to read PM.
3. Locate the saved PM using 'OPEN' button.
4. Data will be displayed.
5. Only newer BB5 phones are supported in the
Lock Counter Reset function of this tool.
6. To reset the Lock Counter, just click the
'RESET' button.
7. After resetting, save the file as '*.PM.'
8. Write back to phone the saved PM file.
9. Use any box capable to write PM.
================================================
Updated Version (v.0.2) :
- FBUS Function Added:
** Phone Scan (Identify Phone, Read IMEI)
** Lock Code Reset (O.P.) (DCT4, WD2 & BB5)
** Factory Reset (DCT4, DCT4+, WD2, BB5)
** LOCAL, TEST, NORMAL, RESTART Mode
- Bonus : Nokia Test Mode Cable Diagram
================================================
TO GOD BE THE GLORY!!!
================================================

Download Here!

Free AbsolutedODM 1.02 by ferjavrec

2008-12-27T09:12:00.000+07:00

AbsolutedODM V.1.02 FREE

Features:

* Unlock
* IMEI change / repair
* Format FMGR
* Repair EEPROM

Supported models:

- C115, C116, C117, C118
- C139, C140
- C155, C156, C157
- C257, C261
- V170, V171, V172, V173
- W370, W375

Download here!

DCTX BB5 King

2008-12-26T20:50:00.000+07:00

Unlock Nokia BB5 phone via DCTX BB5 King via UFS box.

Download Here.

Mobimb 2009

2008-12-25T20:37:00.000+07:00

Features
1.Browse your phone's folders using a simple explorer-style user interface
2.Drag & drop ringtones and graphics into the phone to use as a ringtone/logo
3.Manage your photos, music and other media files
4.Drag & drop Java MIDlets into the Games and Applications folders on your phone
5.Uploads files without affecting their original quality
6.Select colour wallpaper, operator logo, startup logos from your PC
7.Preview images and audio files on your PC (requires media player)
8.Save your existing files to your PC

About 387 phone types supported

Download Here

BB5 Repair Guide

2008-12-24T13:32:00.000+07:00

BB5 Repair Guide by Sniper01 v1.0
Download Here

All China Pinout V.3

2008-12-23T16:35:00.000+07:00

New collection Pin Out Chinesse Phone from STBSL.

Download here.

BB5 RPL Writer DSS v03 by UFS

2008-12-23T16:31:00.000+07:00

For write RPL Nokia BB5 using this tool from UFS Team.

Download here.

Nokia PC Suite 7.1.18.0 Final

2008-12-15T22:13:00.001+07:00

Nokia PC Suite is a package of Windows-based PC applications developed especially for use with Nokia phones. Depending on your phone model, Nokia PC Suite lets you edit, synchronize and back up many of your phone's files on a compatible PC through a cable or wireless connection.

Connection method compatible with your Nokia mobile phone:
- Infrared (IrDA) port
- Bluetooth via a supported stack: Digianswer Bluetooth Software Suite,
- Microsoft Windows XP Bluetooth, or WIDCOMM Bluetooth for Windows 1.4
- Nokia Connectivity Cable DKU-2 (USB) or Nokia Connectivity Adapter Cable DKU-5 (serial)

Key features :
· Automatic, secure data, information, pictures, and music transfer from phone to phone or phone to PC
· Fast, easy connection to the Internet
· Connect wirelessly or via cable
· Connect by using your phone as a modem
· Manage messages, contacts, images, and music
· Synchronize your phone and PC calendars
· Install Java™-based applications in your phone
· Convert ringing tone formats
· Play multimedia messages and videos
· Send text messages from the PC
· Back up and restore phone files
· Over 30 languages

Requirements for Nokia PC Suite :
Available hard disk space: 150 MB (file size approx. 25 MB)

Supported operating systems:
* Windows Vista x32 and x64 editions
* Windows XP Professional x64 edition
* Windows XP (Professional or Home Edition) (Service Pack 1 or Service Pack 2)
* Windows 2000 (Service Pack 4)

Connection methods: USB cable, infrared, or Bluetooth

Supported Bluetooth stacks / software:
* Windows Vista x32 and x64 editions:
o Microsoft Windows Bluetooth
* Windows XP x64:
o Microsoft Windows Bluetooth
* Windows XP:
o Microsoft Windows Bluetooth (only in Service Pack 2)
o Toshiba Bluetooth stack for Windows XP/2000, driver version 4.0 and 5.0
o WIDCOMM BTW 1.4, 3.0, 4.0, 5.0
o IVT BlueSoleil Bluetooth stack for Windows XP/2000, driver version 1.6.1.4 and 2.x
* Windows 2000:
o Toshiba Bluetooth stack for Windows XP/2000, driver version 4.0 and 5.0
o WIDCOMM BTW 1.4, 3.0, 4.0, 5.0
o IVT BlueSoleil Bluetooth stack for Windows XP/2000, driver version 1.6.1.4 and 2.x

Right-click the Bluetooth icon in the Windows tray and select Advanced Configuration. On the General tab you can see the version of the stack.

Windows Media Player 11 is required when using Windows built-in applications with Nokia phones.

Download here

JAF_Nokia_BB5_Unlocker 1.0

2008-12-10T15:59:00.000+07:00

Features:

unlock all known models from cinek's previous version
repair damaged simlock area
make security backup
restore security backup
phone info
full factory reset
work with Raskal and Thomas pkeys, even the damage pkeys by Manole & Zulea are working, so you have enough time to exchange it

Die Software unterstützt Handys mit folgenden Daten:

HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F and 273F6D55DFAAF68F
HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8.
RAPIDO ROM ID supported: F2C6EBADC86E6189 (für neuere N95)

If you are downloading software from other links than the link posted here, you are using it on your own risk and i will not exchange pkey from now on.

DOWNLOAD ONLY FROM: files.odeon.cn oder direkt:

Driver for Motorola

2008-12-10T08:29:00.000+07:00

Instaler Driver Motorola v3.7.0
Install this driver in your PC for detec motorola phone while connect whith PC, for flashing and data transfer.

Download here.

Nokia BB5KING v1.09 -- update 4 December 2008

2008-12-05T08:41:00.000+07:00

Nokia BB5KING v1.09

Link for download BB5KING v1.09 software update:

Download here

What is new:
- Activate Card button removed for all PKEY kind of dongles (is no more necessary)
- Now Repair SL button works
- Added back UFS N-Box support
- Added back forced selection for interface (can have JAF and UFS connected in same time on PC)

BR,
Manole

Samsung Hardware Solution in one exe V9.9

2008-12-04T20:20:00.000+07:00

Download here

China Mobile Hardware v1.1.1

2008-12-04T17:24:00.000+07:00

Download here

new dct-4 nokia hard library ver 7.0

2008-12-02T21:57:00.000+07:00

Download here

PKEY BB5 UnlockV1.06 All PKEYS Raskal Thomas

2008-11-30T21:23:00.000+07:00

PKEY BB5 Unlock All PKEYS_Raskal Thomas NoInternetRequired

Download here

SonyEriccson Guide By Black Attack

2008-11-27T21:10:00.001+07:00

Download here

All HTC Unlock in one soft

2008-11-27T21:10:00.000+07:00

It support :

=========
HIMALAYA
=========
Qtek 2020 - Dopod 696 - Dopod699 - O2 XDA II - T-Mobile MDA II -
i-mate Pocket PC Phone Edition - Orange SPV M1000 - VodafoneVPA -
Telefonica TSM500 - KromeNavigator F1 etc...

===========
blue angel
===========
O2 XDA IIs - T-Mobile MDA III - i-mate PDA2k - Qtek 9090 -
Dopod 700 - Orange SPV M2000 - E-Plus PDA III - Siemens SX66
- Tata Indicom Ego etc...

========
htc elf
========
HTC P3450 - HTC Touch - HTC Ted Baker Needle - HTC Touch P3450
- Dopod S1 - T-Mobile MDA Touch - O2 Xda Nova etc...

=========
EXCALIBUR
=========
HTC S620 - HTC S621 - Dopod C720W - Dopod C720 - T-Mobile Dash
- T-Mobile MDA Mail - O2 Xda Cosmo - Orange SPV E600 etc...

========
KAISER
=======
HTC P4550 - HTC TyTN II - HTC TyTN II - Vodafone VPA Compact V -
Vodafone v1615 - SFR v1615 - Swisscom XPA v1615 - T-Mobile MDA Vario III
- AT&T Tilt - O2 Xda Stellar - EMobile Emonster S11HT etc...

=======
PROPHET
=======
Qtek S200 - Dopod 818 Pro - Dopod 830 - Swisscom XPA s200 - O2 XDA Neo
- i-mate JAMin - Orange SPV M600 - Vodafone VPA Compact S - T-Com TC 500 etc...

========
TRINITY
========
HTC P3600 - HTC P3600i - Dopod D810 - Dopod CHT9100 -
Dopod CHT9110 - Orange SPV M700 - Vodafone VPA Compact GPS
- SFR S300+ - Swisscom XPA v1510 etc...

=======
WIZARD
=======
HTC P4300 - Qtek 9100 - Qtek A9100 - Dopod 838 -
i-mate K-JAM - T-Mobile MDA Vario - T-Mobile MDA -
O2 XDA Mini S - Orange SPV M3000 - Cingular 8125 -
Vodafone VPA Compact II etc...

Download here

Ultimate Unlockers v3.06 beta

2008-11-27T20:13:00.000+07:00

Here are release notes:

Version 3.06 (Beta) [081126]
****************************
- Unique feature: Phone file-system explorer via FTP (for A2 platforms)

Simply select the "Explore FS" option and proceed. The program starts an FTP server at localhost and halts (until pressing the Ready button). Meantime, just use your favorite FTP client and connect with these parameters:

- server: localhost (or 127.0.0.1)
- port: 21 (it's the default FTP server port, you do not need to enter it anywhere)
- username: www.cruisersuite.com
- password: is the same as you use on Cruiser supreme server (the one you filled in the application settings)

Enjoy exploring the phone's file-system, and press Ready when finished.

Note: We recommend to use a FTP client with UTF-8 filename encoding support (FileZilla, SmartFTP, ...)

Your,

Cruiser Team
http://www.cruisersuite.com

Download here.

Mx Key Beta13 fixed is ready

2008-11-27T17:33:00.000+07:00

v3.0 Beta13 RC, Public-Release
- NK
Added "skip Restore" patch for DCT4PLUS unlock
minor bug fixes
- VCOM

Fixed, registration popup

Added, PK-83 Dongle emulation (you need to install CCS3 Tool first before it works)

Download here.

Free BB5 No TP For Thomas Pkey Released

2008-11-26T19:36:00.000+07:00

Thomas PKEY BB5 Unlocker v.103
=======================
Features :
- Free to all THOMAS PKEY
Most well know thing of gsm

-BB5 unlocker without TP
-it can repair Config:FFFFFFFFFF
-it can repair Config:0000000000
-And most important . it requires internet conection

Rap3Gv3 phones:
3109c (RM-274)
3110c (RM-237)
3250 (RM-38)
3500c (RM-272)
3500cb (RM-273)
5200 (RM-174)
5200b (RM-181)
5300 (RM-146)
5300b (RM-147)
5500 (RM-86)
6085 (RM-198)
6086 (RM-188)
6086b (RM-260)
6125 (RM-178)
6126/6133 (RM-126)
6131 (RM-115)
6131 NFC (RM-216)
6136 (RM-199)
6151 (RM-200)
6233 (RM-145)
6234 (RM-123)
6280 (RM-78)
6300 (RM-217)
6300b (RM-222)
7370 (RM-70)
7373 (RM-209)
7390 (RM-140)
8600 (RM-164)
E50 (RM-170)
E50 (RM-171)
E50 (RM-172)
E61 (RM-89)
E61i (RM-227)
E62 (RM-88)
E65 (RM-208)
N73-1 (RM-133)
N73-5 (RM-132)
N75 (RM-128)
N77 (RM-194)
N80-1 (RM-92)
N80-3 (RM-91)
N92 (RM-100)

RAP3GV2 :
6630 (RM-1)
6680 (RM-36)
6681 (RM-57)
6682 (RM-58)
N70 (RM-84)
N70-5 (RM-99)
N71 (RM-67)
N90 (RM-42)
N91-1 (RM-43)
N91-8GB (RM-43)
N91-5 (RM-158)
N93 (RM-55)

RAPIDO supported:
N95 (RM-159)
N95 (RM-245)
N95 (RM-160)
E90 (RA-6)

wbr,
Jaf Team

Download here

This log info tested by mr.akianghammer:
JAFbox Opened..
Please wait.. Rebooting phone
MCU SW version : V 05.51
05-09-07
RM-146
(c) Nokia.
IMEI : 355550019120760
CONFIG KEY: FFFFFFFFFFFFFFFF
SP Data Corrupted....

================================================== =======

JAFbox Opened..
Please wait.. Rebooting phone
================== READING PHONE INFORMATION ========================
MCU SW version : V 05.51
05-09-07
RM-146
(c) Nokia.
IMEI : 355550019120760
CONFIG KEY: FFFFFFFFFFFFFFFF
SP Data Corrupted....
================== AUTO Backup PM-308 ========================
MCU SW version : V 05.51
05-09-07
RM-146
(c) Nokia.
IMEI : 355550019120760
Reading PM 308
PM 308 Size : 8192
PM 308 save to C:\Documents and Settings\Akianghammer\My Documents\JAF Thomas\bb5\backup\355550019120760_190845.pm
PM 308 reading done.
================== 1st Boot ========================
RAPx ID : 000000010000022600010006010C192101001101
EM ID 1 : 00000232
EM ID 2 : 00000353
RAPx PubID : 1310020428D76B56AEE1777D25AB4A9971982D9F
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROM ID: 191EC665DFAAF68F
Boot OK
Auto Selected rap3gv3
================== 2nd Boot ========================
Write PATCH 1 ..
- Phone-ACK 0x550200003D3D
Server verification..
Write PATCH 2 ..
PKEY Verified OK..
- Phone-ACK 0x550200E402E6
Write PATCH 3 ..
- Phone-ACK 0x550200483971
>>> phone reply : HELLO U
>> : ok
Write PATCH 4 ..
>>> phone reply : 550200040004
- Phone-ACK 0x550200F054A4
>>> phone reply : 550200010001
>>> phone reply : 550200010001
>>> phone reply : HELLO U
Sending PM308 buffer in flash mode...
>>> phone reply : HELLO
Test Custom Code
>> : Test call...
>> : cpsr - 0x0000001F
>> : p15_1 - 0x0005307F
>> : p15_2 - 0x0005117F
>> : p15_3 - 0x0005317F
>> : esn_init ret - 0x00000001, - 0x00000027
>> : esn_read ret - 0x00000001, - 0x00000001
>> : Normal BB5 found - 0x0002B400
>> : LR - FFFF3688, param - 0x03, size - 0x00
>> : UpdSLock - 0x00000001
>> : ret - 0x01, - 0x23
>> : PM_308 CRC - 0x001931EA
Test custom done..
Please wait while reading calculated SPData..
Read Done!..
Unlock Data saved to : C:\Documents and Settings\Akianghammer\My Documents\JAF Thomas\bb5\Unlock Data\355550019120760_ 190909_unlocked.pm
Rebooting Phone
sending unlock data..
MCU SW version : V 05.51
05-09-07
RM-146
(c) Nokia.
IMEI : 355550019120760
>>> phone reply : 5512000023000C103100030001
Rebooting Phone
Reading phone information after unlocking process..
MCU SW version : V 05.51
05-09-07
RM-146
(c) Nokia.
IMEI : 355550019120760
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
SP Lock Status : Not Locked
Unlocking Done....
===========================================
Operation time started : 19:08:31
Operation time End : 19:09:29
===========================================
Phone Not Locked

================================================== =====

Black Attack Collection 2008 (Sony Ericsson Repair)

2008-11-24T17:15:00.000+07:00

Download here.

Test Point For All GSM Phone

2008-11-22T09:26:00.000+07:00

Download here

Nokia BB5 Hard Library v5.0

2008-11-21T16:55:00.000+07:00

Download here

Nokia BB5 charging solution in all models

2008-11-21T16:31:00.000+07:00

Download Here

Nokia PC Suite v7.0.9.2

2008-11-21T16:25:00.000+07:00

Nokia PC Suite for Nokia phones lets you edit, synchronize and back up many of
your phone’s files.
Nokia PC Suite is a package of PC applications developed especially
for use with Nokia phones. This software will enable you to connect your mobile
phone to any desktop PC to sync data, back up, download and install software,
update software, share pictures and music between the mobile phone and PC. Version
7.0.9.2 includes changes as enabling the synchronization of files and folders
between PC and phone and notifying when new add-on applications are available.

Here are some key features of " Nokia PC Suite":
• Back up and restore phone files
• Transfer information, pictures, and music from phone to phone or phone
to PC
• Synchronize your phone and PC calendars
• Edit contacts, pictures, and phone file names
• Install Java-based applications in your phone
• Convert ringing tone formats
• Play multimedia messages and videos
• Send text messages from the PC
• Connect by using your phone as a modem

Download Here

Mx Key Update v3.0.12

2008-11-13T10:48:00.000+07:00

v 3.0 beta12 is out !

download

v3.0 Beta12 RC, Public-Release
- MAIN
Fixed, dongle registration popup
- NK
DCT3 fully implemented
Fixed, BB5 flash for new phones
some improvement and minor bug fixes
- CCS
Fixed, 6066/88 flash

Coming soon mxkey bb5 king

SOON WILL BE RELEASE MXKEY BB5 KING UNLOCK BB5 NO TEST POINT
WAIT AND SEE STAY TUNE

Cruiser Hot....free A2 Unlock

2008-11-11T13:34:00.000+07:00

Card -07 and -06 registration

A new Supreme Credit Account with 0 credits can be created by registering your new Cruiser-07 dongle and also Cruiser-06 dongle here on the Cruiser Suite site.

* Are you a Cruiser-07 or Cruiser-06 dongle owner?
* Do you want to take advantage of free A2 unlocks but you do not have a Supreme Credit Account yet and you do not want to purchase any credits?

Just follow to this registration form, enter your card-id and a valid email, where you receive your password.

MT Box Nokia - MTB NK v1.54.1

2008-11-11T11:36:00.000+07:00

Release notes:

Added support for RAP3Gv2 phones
Fixed bugs for 3110c phones - we hope that this work on all 3110c

Please note:

Do not use USB hubs, please connect MT box direct to PC USB

Download here

1200 1208 And 1650 Imei Patch FILES

2008-11-09T15:48:00.001+07:00

1-put PATCH in MCU.
2-PPM and CNT asuaual (Ver 4.11)must.
3-Tick on UI and UNLOCK options.
4-When unlock patch ask file, give same patch which use in MCU.
5-Tested on 1200 1208 and 1650..

Download here.

Nokia Erase File Builder (DCT4,WD2)

2008-11-09T09:15:00.000+07:00

You only have load MCU file
> select MCU Version
> wait for few seconds
> Erase addresses is loaded
> just select erase option then press build file

Download here.

MobilEdit v3.0.0.38 New version

2008-11-08T09:07:00.000+07:00

Visit and go here.

BB5 unlocking now at your own FINGERTIPS.

2008-10-30T18:18:00.000+07:00

This Software From my Friend Bojs

I would like to share with you this simple BB5 tool:
Explore and see that BB5 unlocking is NOW in your own FINGERTIPS!!!

this tool is NOT, again, that this tool IS NOT(!), an unlocking
tool for BB5 phones. What this tool can do as per my tests,
it can reset the unlock counter of the newer BB5 phones
based on the 'idea' shared by Sir Ulysses.

With this tool and some 'small' common sense, it MAY HELP
YOU UNLOCK BB5 PHONES WITHOUT TP AND WITHOUT ANY BOX
OR GADGET. But it is up to you. EXPLORE!!!!

The download links:
Here

JAF Setup 1.98.61

2008-10-09T06:43:00.000+07:00

JAF Setup 1.98.61 ready...

Please Click for Download

br
ODEON Team

Solution ERR: CMT 2ND Boot CMT 2ND CERT Mismatch

2008-10-04T01:53:00.000+07:00

UPDATED ! ERR: CMT 2ND Boot CMT 2ND CERT Mismatch" with v2.0.8 Official Temp Solution

If you are sure the voltage regulator inside your UFSx is correct, then you need to replace the flash folder with the one on support in HWK_SW called flash_fix.zip.

Default flash folder is x:\Program Files\Nokia\Phoenix\Flash
Alternative Install is x:\Program Files\SarasSoft\UFS\UFS_DCTxBB5\Flash
or where you chose to install ...

Odia.

This is sample Log in perfect setup:
1ST BOOT : C0,0B [Rm-320] [2.0.8.0]
OMAP ID : 24200705
OMAP MODE : 00
OMAP PBID : 67FCE6230A47937FC142EFBB5517C923659520AB
OMAP HASH : BA8710A7E1CD5A2909B9A875DB27AA24
RAPx ID : 000000010000022600010006400C192101021103
EM 1 ID : 00000295
EM 2 ID : 00000B22
RAPx PBID : 06F0001555830058931CEE6350556BB22C3E7972
RAPx MODE : 00
RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
RAPx ROID : A8C1D6713E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.37.1
CMT FLID0 : 00010035-00006921, Amd 29NS128N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.31.0
CMT KSIG0 : 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
APE 2ND Bt: omap2420_m1_2nd.fg, Ver: 1.41.0
APE FLID0 : 00EC0040-00220000, Sam OneNAND-2G
APE RQALG : OMAP2420 UNISTORE-II-1.5.1 ALG
APE MCID0 : FFFF0000-00000000, IMC
APE 2ND Boot OK
APE ALG0 : teflon_sam_nand_xsr151_m1.fg, Ver: 1.57.0
APE VPP : Internal
APE KSIG1 : 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
DUAL LINE : True
APE ALG Boot OK
Rebooting Mobile

Salam

All Hard Reset Key (Add New 2)

2008-10-02T21:07:00.000+07:00

Note:

Hard resetting the device will cause the device to be reset back to its original factory default settings and all data and installed programs will be lost. Disconnect the unit from AC power. Use your stylus when it states below, “Press the Reset Button”.

ACER N50
Hold down the today and the mail buttons. Simultaneously press the reset button.

ACER N300
Hold down the HOME and the IN BOX buttons. Simultaneously press the reset button for about 2 seconds.

Asus A632 - A636
Hold down the power button and press in the reset button for about 6 seconds.

BenQ P50 - BenQ/Siemens P51
Hold down the power button and press in the reset button with your stylus for about 6 seconds. Once the screen fades, press the power button again to activate the unit.

Dell Axim X3 - X3i - X30
Press and hold the power button while you press the reset button for about 6 seconds. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory. Then press the Contacts button. To cancel, press the Mail button.

Dell Axim x50 - x50v - x51 - x51v
Turn the device ON. Press and hold the power button while you press the reset button for about 6 seconds. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory. Then press the Contacts button. To cancel, press the Mail button.

ETEN M500
Hold down the power button and then press the reset button for about 6 seconds.

ETEN M600
Hold down the power button and the (CTRL - ALT!) button simultaneously and then press the reset button for about 2 seconds. Then release all buttons at the same time.

Fujitsu Siemens Loox N560
Press & hold the power & calender button, then press & release the reset button. Continue to hold the power & calender buttons for a few seconds. When you release the power & calender buttons the unit should beep & then reset.

HP iPAQ h1900 Series (1910 - 1915 - 1930 - 1935 - 1940 - 1945) - HP iPAQ h6300 Series (6310 - 6315)
Hold down the power button and press the reset button about 6 seconds.

HP iPAQ h2000 Series (2210 - 2215)
Hold down the Calendar and iTask buttons, and then press the reset button on the for about 6 seconds. After the screen fades, release all buttons. You can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset you unit. Now you can connect iPAQ to the AC power or press the reset button again with your stylus.

HP iPAQ h5000 Series (5450 - 5550 - 5555) - HP iPAQ h3800 Series (3830 - 3835 - 3850 - 3855 - 3870 - 3875)
Hold down the calendar and iTask buttons, and then press the reset button for about 6 seconds. After the screen fades, you can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset your unit. Now you can connect the iPAQ to the AC power or press the reset button again with your stylus.

HP iPAQ hw6500 Mobile Messenger Series (6510 - 6515), iPAQ hx2000 Series (2410 - 2415 - 2710 - 2715) and HP iPAQ hx4700 - hx4705
Hold down the calendar and iTask buttons, and then press the reset button for about 6 seconds. The Pocket PC should reset and power back on. If the device does not power back on, make sure that the battery lock switch is set to the left.

HP rw6828 - O2 XDA Atom - O2 XDA Atom Pure
Press the reset button with your stylus, then press the power ON/OFF button at the same time. A confirmation screen should ask you to press the green call and the red end call buttons together.

HP iPAQ rz1700 Series (1710 - 1715)
Hold the Mobile Media and the Today buttons, then press reset button for about 4 seconds. To confirm, press the power button. If the device does not turn on then you have successfully hard reset you device. Now you can connect the iPAQ to the AC power or press the reset button again with your stylus.

HP iPAQ rx3115 - rx3715
Hold down on the far left (Mobile Media and the iTask buttons then press the reset button for about 6 seconds.

HTC Apache - Sprint PPC-6700 - Verizon XV6700
Hold both the softkeys (buttons with “-“ on them), push the reset button once. Release just the reset button while still holding onto the softkeys. A confirmation screen should appear asking you if you want to reset all data. Press Y to reset, and N to cancel.

HTC Blue Angel - i-mate PDA2K - Siemens SX66 - T-Mobile MDA III
While holding down the power button press in on the reset button (reset hole) with your stylus for about 6 seconds.

HTC Magician - Dopod 818 - O2 xda II mini - i-mate JAM - QTek S100 - T-Mobile MDA Compact
Hold down the power button and press the reset button for about 6 seconds.

HTC Trinity - HTC P3600 - Dopod D810 - Dopod CHT 9100 - Orange SPV M700 - Vodafone VPA compact GPS
Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot.

HTC Universal - T-Mobile MDA IV - Vodafone VDA IV - O2 XDA Exec - i-mate JasJar - QTek 9000 Orange - SPV M5000
Press the two soft keys together then pressing the reset button on the back of the unit. A confirmation screen should appear that reads, "Press 0 to reset to factory defaults or X to exit." Press ZERO to confirm the factory reset.

HTC Wallaby - O2 XDA - QTek 1010 - Siemens SX56 - T-Mobile MDA
Hold down the power button and press the reset button for about 6 seconds.

HTC Wizard - Cingular 8125 - i-mate K-JAM - T-Mobile MDA
Hold the Comm manager button and the Voice Command button, the press the reset button once. Hold the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To reset, press the green send key.

Another is from original manual:

After pressing the reset button with the stylus you must CONTINUE TO HOLD the Comm Manager and Voice Command buttons until you see a message asking you to press the send button (the green phone) to perform a hard reset. Following this, wait patiently and the K-JAM should eventually boot into Windows Mobile.

Mitac Mio 168
On the back of the unit, slide the battery switch to OFF. After about 1 minute, slide the battery switch back to the ON position. The unit will restart with the default settings.

Mitac Mio A201
Remove the battery cover. Use the stylus to slide the battery switch to OFF. After about 1 minute, slide the battery switch back to the ON position. Install the battery and immediately press the Record Button. The screen should show "cold boot" and "loading......" Replace the battery cover.

Mitac Mio A701
The device must be turned off. Press and hold the down volume button and the end button at the same time. Release both buttons when the device vibrates. The unit will turn on automatically and the Setup Wizard will be displayed. Follow the instructions to complete the hard reset process.

Palm Treo 700w
Hold the Power-End button and then press the reset button. When the confirmation screen asks you “Do you want to erase all data?”, you can release the Power-End button and press the up button on the directional pad to confirm the hard reset.

Toshiba e310 - e330 - e335 - e350 - e355 - e400 - e405 - e570 - e740 - e750 - e755 - e800 - e805
Device should be off. Hold the power button and press the reset button then release the power button. When the screen appears release the reset button.

Viewsonic V36 - V37
Device should be off. Slide the grey latch on the right hand side of the unit to open the battery compartment. Slide the short grey switch above the battery bay to the OFF position and remove the battery. After a brief few seconds, insert the battery. Then slide the short grey switch above the battery bay to the ON position. Now, replace the cover and slide the grey latch back to the lock position. Turn unit ON.

Xda Orbit
Press the two soft keys together then press the reset button on the side of the unit. A confirmation screen should appear that reads, "Press 0 to reset to factory defaults or X to exit." Press ZERO to confirm the factory reset.

FSC LOOX T810/T830
Slide off the battery cover from the Pocket PC. At the same time press and hold the End Call button and press the tip of the stylus pen into the soft reset opening. Release the end button as soon as a list of possible options is displayed on the screen. Select Skip if you would like to perform a normal cold start. To restore the Pocket PC to the factory defaults select Factory Defaults.

MATE PDAL

To hard reset, hold down the two soft key buttons directly below the screen, and press the reset pin.
You will be presented with a menu saying 'press R to reset, X to exit'
Phone must be powered on without sim card

Trin 100

Hard reset key have try and test
should work 100 %

Also the Camera & Power button with soft reset doesnt go to bootloader, just make soft-reset, aswell as the Hard-Reset by the pad-buttons doesn't work.
When you press the stylus in the reset hole - keep pressing the buttons until you see the bootloader

Dopod 838

Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device.

Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press R to reset, X to exit', if you press R Your device will be set back to factory default settings.
(The L/R soft keys are the "--" keys just up the start and OK buttons)

Htc hera100

User lock: hold down 2 softkey below screen and push reset with stylus after read black screen press green button.

Dopod c800 /htcc800/hera100 here
To perform a hard reset

1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the middle left side of your device.

2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
“This operation will delete all your personal data, and reset all settings to manufacturer default.
Press Send to restore manufacturer default, or press other keys to cancel.”

3. Release the two SOFT KEYs, and then press the button on your device. Warning! Your device will be set back to factory default settings.

Wiza100 dopod838 hardreset key here(non 3g)
Hard reset : holding the comm manager and voice button and pressing the reset button with the stylus.

O2 - ST20F freez on O2
1. Turn off phone.
2. Press hold & left + right soft menu key

3. While still holding left + right soft menu key then on/off button & release.

4. Keep left + right soft key pressed until you see the message:
"Press 0 to restore fatory setting, other key to quit"
5. Press 0 and wait for the phone to boot up, the restoring of factory default will begin and will ask to reboot your phone when done.

HTC s710

Hard reset
*Turn off your phone,
* then press both *SOFT KEYS* and *POWER ON* device.
*After moment release both soft keys.
*On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.

HTC EXCA 100

Hard Reset ....

Step One:
Preform power down *Hold the power button* Till the phone is 100% powered down and all you see is a black screen
*keep in mind if your device is plugged into a power source or computer link this will not work!*
Step Two:
(Use both hands while doing this it will be much easier!)
Place 1 finger on each of the Soft keys.
Step Three:
Press the power Button and hold for no more than 2 sec well holding the two soft keys (do not hold the power button till the phone turns on) ONLY PRESS THE POWER BUTTON DO NOT TURN THE PHONE ON. After pressing the power key keep your fingers on the Two Soft keys until you see a the phone turn on and a black screen come up with white writing. Once you see this screen Press the Green Send key and there you go you have just performed a hard reset on the T-Mobile dash without using the settings screen on the phone.

TOSHIBA G500 HARD RESET WAY+KEY
WAY=
tap start > setting
tap the system tab
tap master clear
enter the confirmation code in the code : field
tap the reset button to reinitialise you phone
your phoen will restart after it has been reset

KEY=
TURN pda off press and hold the green button on the slide+BS(Del)+Power until the light go on. Then a red screen apears answering if you want a clean boot (y/n) press Y and the pda resets when you power on again it will install the windows as new.

Glofish x500
1. Press the power button.
2. Press the SR button and release both power and SR button, right after this, press on the "END Call" red button,
3. keep holding the red button until you see a white message with Return to factory defaults.
4. press the Left Soft key for 3 seconds untill the yes is selected

HTC P4550 / HTC TyTN II / Orange & HTC TyTN II / Vodafone VPA Compact V / Vodafone v1

Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone

Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel

XDA II : O2 XDA EXEC

Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.

All Hard Reset Key (Add New 1)

2008-10-02T11:35:00.000+07:00

New info add......

O2 xda2 wm2005/wm2006 .........
For wm2003/se
Hold down both power and stylux untill power on

For wm2005/2006
Press and hold the CAMERA and COMM MANAGER buttons, and use thestylus to press the RESET button. Holds the CAMERA and COMM MANAGER
You will see the step.

Artemis_Resets
To do a hard reset.
Press both soft keys and insert stylus into soft reset button and press.
Release the soft reset button and keep pressing the soft keys.
When the "This operation will delete all your personal data, to manufacturer default" appears on screen.
Press Green call button to restore manufacturer default, or press other keys to cancel.
The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.

i-mate PDAL
To hard reset, switch the phone off. Not stand-by, but completely off.
Then, press and hold the Camera button, the green Call button, and the power button.
Your phone should reset.

smart amazing phone-PC20B model
Take just three step.button(remove card first
1,off the phone.>press on+voice rec button()
2,(show boot load....)after show
3,press immeditley middle OK key
(show 1,2,3,4,5,6,7,8press ok.

SPV M1000
Hard reset key for m1000 is hold the power button and press the
> reset button at the same time

free gift

Spv m1000 also know as himalaya O2 Xda II / QTEK 2020 / SPV M1000/ Dopod 696
it can flash to wm2006 and aku
want more detail pls post here i will try to upload and help.

Spv-M3100 (hard reset)
Press 2 Soft Keys then Press Power Button
See Screen Next Proccdure

Voq A10
Windows based smartphone hard reset
There are two ways i not test , but try should work !!!

First, remove your battery for a few seconds then, re-install it.

Second, open the keypad and press and hold the Space key. While holding the space key, press and hold the power button.

Once the screen turns blue, you can release the buttons. It should say the factory settings are being restored or something like that.
phone should reset.......
Reset the Phone.
First step by Switching of the Power.
Second step, open the key pad, press space bar key as well power switch of the phone together hold them till it resets your entire applications.It will take minmum 3 mintues.

The only problem is that you will lose all the contacts details, you need to Sync once agin with your PC.

Sidekick2
Two solution
Open the screen only halfway and in the metal strip there is a very small hole on the right side. Use a paperclip to push that button down and hit the power button at the same time.
hold Jupm, Volume up, Softreset key

All Hard Reset Key

2008-10-02T10:41:00.000+07:00

MEAN SOFT RESET !!!

Soft Reset
A soft reset tells to your device to stop what it is doing and to restart.
All records and programs stored in device will be retained after a soft reset.
After resetting, the usual start screen will appear.
Use a soft reset when your device seems to have crashed or hanged.
This type of reset is the first to try, before any others, to solve the above problems.
This kind of reset is, usually, well known by the user and really easy to perform.

Hard Reset (or Full Reset)
Performing a hard reset, all settings, records and programs stored in the Pda
(except the ones stored in Rom) will be erased.
After a Hard Reset formats, preferences, and other settings will be restored
to the factory default settings.
You can restore any previous data if you got a Backup of your device before
the hard reset otherwise you will need to reinstall any third-party applications.
If you are hard resetting your device owing to some hard problem i suggest
to restores installed applications without using the backup if you are not sure
that backup data do not include the problem you wish to solve also. In few words a hard reset allows you to start everything over from scratch.

Hope Can Help Bro...........all This Are Copy From A Website But I Forgot The Web Link , Now I Only Copy To Here Let All My Friend Share.......

Dont Thanks Me Because I Copy From Other

AUDIOVOX /-
1032C Maestro
Press the power button while pressing and holding the reset switchwith the stylus, and then release the power button.
When a screen appears, release the reset switch. When initialization is completed, the Welcome screen appears. Set up the system as in the case of startup process.

ACER /-
n10/n20/n30
for the soft reset note that these model have the button in different
places (at the bottom, rear or side). To perform an hard reset you need
instead to to toggle the reset switch to the left and back to the right.
The reset switch is usually at the bottom of the devices except for n20
model for which you have to remove battery as the reset switch is
located in the right side of the battery bay.
n50
For this model to perform a soft reset use the tip of the stylus to press
the reset button inside the hole on the left side of the unit.To perform an hard reset, while holding the Today and Messaging buttons,
press the reset button inside the hole as detailed above.
n300
While holding pressed the Messaging and Today buttons in front of the
device, press the reset button into the hole at the bottom of the handheld.

ASUS /-
My PAL 620
Press and hold at the same time the button 3 (Contact) and the stylesin the "Reset" button located on the right of MyPal to access to
"BIOS" . Using the stylus press the button "Reset" and all is done.
It appears that there is another way to perform an Hard Reset on this
device. Push and hold power button and press the reset button and
all is done.
a716
This device has in the space under the battery a little switch that
you can move to disable the Backup battery. As to reach the switch
you removed the main battery, this action performs an Hard Reset.
(this is another way along with the mutiple buttons to avoid accidental
hard resets)
a730
You can use the second procedure mentioned above for the a620, I.E.
To press the power button and at the same time the soft reset button
using the stylus.
a632/a636
To perform an Hard reset press and hold the power button while
you press the tip of your stylus on the reset switch at the bottom
This will cancell all data that unit is elaborating reinstating the
device to the default setting of the watch.
To perform a Clean Boot (that really coorrespond to a true Hard Reset),
press the Speaker (-) button and at the same time the button Change
Modality and also the stylus on the reset button. This will reinstate the
device to the original default setting.

Mars II/(O2 xda Zinc)
To perform a hard reset, use the stylus to reach the reset button
found besides the device's camera button. Keep the stylus on the
reset button and press the Up Navigation button at the same time..

BENQ /-
P50
Press and hold power button. At the same time use the stylus to press
the recess Reset button. When the screen has faded off release both
buttons and when the power indicator light up green press the power
button to restart the unit.

CASIO /-
E-115/125 & EM-500
The procedure is less authomatized than the others. Remove the
CompactFlash card and power on the unit. Holding down the power
button, use the stylus to press the reset button for about 2 seconds.
You will see shown on the screen: "Proceeding with this operation
initializes memory. Press (Action) to proceed or (Start) to cancel".
Press the (Action) option to perform the Reset.

CLIE Sony /-
Connect the CLIE handheld using the AC adapter and take out the
stylus pin by twisting the upper part of the stylus. Push down and hold the power button of the unit and use the stylus
to slowly press and release the reset button on the back.
When the Palm screen will appear release the power button. At the "Erase all data?" prompt, push the upper part of the scroll
button on the front of the device to confirm OK. The Sony pda is now
reset and you have only to follow the SetUp steps as prompted.

COMPAQ /-
Aero 15xx Series
Remove both the main and backup battery, wait at least 1 minute,
then replace the batteries. (Backup Battery on the left side)
iPaq 3600, 3700 Series 36xx bottom
Press the recessed soft reset button in the hole on the bottom right
for more than 3 seconds to perform a hard reset.
You can also perform a hard reset opening the door on the bottomleft of the device and moving the switch behind the door to obtain
the same result
iPAQ H3800/H3900/5450/5500
To perform a hard reset first remove the expansion packs if any,thence turn the device on (not connected to AC power) and press
and hold two outside buttons
( 1 Calendar and 4 iPAQ Task ), also insert stylus into the reset
button at bottom of iPAQ and pressing and holding this for 5 secs.Release the above buttons in any sequence. To reactivate iPAQ, insert stylus into soft reset button or simply
connect iPaq to AC adapter.

DELL /-
Axim x5/ X3i
Another procedure a little more involved than the others.
Press and hold the Power Button thence, using the stylus press and
hold the reset button on the left side of the unit until the message
"To clear all data press the Contacts button" is shown. Press the required button located to the left of the directional pad.
When you see the message "Tap the screen to set up your Pocket PC"
execute the requested action and follow the instructions on screen
to set up your PDA again

ETEN /-
m500
Press and hold the power button and at the same time press,
using the stylus, the Reset button on the device's side.
M600 - G500
Press and hold the power button and at the same time press,
using the stylus, the Reset button on the device's side.
Release both buttons at the same time and reply YES to the
questions to cancel registry and to reinstall default settings.
X500
Hold the “Power Button” and press the “Reset Button” with
the stylus, and release both buttons simultaneously. Next,hold the End Button until the system inquiry screen is displayed,
then release the End Button and answer the question(s).
M700
Hold the Power button and press the Reset button using the
stylus. Release both buttons at the same time and next press
the 'End Button' until the inquiry screen appears. Reply to the
question.

FUJITSU-SIEMENS
Loox 400 series
Simultaneously press reset button at the bottom using stylus cap andthe Suspend/resume button on top front of the unit.After about 10 seconds a pictures will appear on th screen and a tonesounds
Loox 720 - 710
Use the point into the unscrewed stylus cap to press the soft reset
button at the bottom and at the same time press the button
suspend/resume in front right corner.After about 10 seconds, when you will see a new screen image and
you will hear an advice sound, follows the relative instruction.
Loox n500/520
Take the stylus and screw it apart.Press the tip into the soft reset opening and at the same time the suspend/resume
and calendar buttonsHold the suspend/resume and the calendar button pressed for a few seconds.The reset can take a few minutes. A signal is sounded after the reset is complete.
Follow the instructions

GIGABYTE
g-Smart (i.Bond)
Press the power button on the top and on the keypad press 7 and 9
(three buttons together) It will display "formating" (Hardreset)

HANDSPRING
Hold down the power button on the front panel of your handheld.
Holding down the power button, press the reset button by paper clip.
As soon as you see the logo on the screen, release the power button.
Press the up scroll button on the front panel to perform a hard reset
or press any other button to perform a soft reset.
You can restore backed up data by performing a HotSync operation.

HP /-
Jornada 520, 525, 540, 545, 547, and 548
Press and hold the soft reset button and press the power button.
Jornada 564, 565, 567, and 568
Perform a soft reset using the button on the back of the device,thence remove the main and backup battery for some minutes.
(The backup battery is locked on the left side of the device)
iPaq 19xx Series
These devices can be hard reset by pressing and holding the soft
recessed button on the left-hand side of the device while you are
pressing and holding the power button at the top the unit. Keep buttons pressed for several seconds until the screen fades.
iPaq 22xx Series
Press and hold Buttons 1 (Calendar) and 4 (iTask) on the front of
the device and, at the same time, press the Reset button on the
back of the Pocket PC using the device's stylus.
Hold thel buttons until the screen begins to fade (about 3/4 secs).
Release the buttons and stylus.
If the device PC has been fully reset, it does not power on and you
must reactivate its battery connecting the same to the AC power
or pressng the usual soft reset button with the stylus.

Note: The iPAQ 19xx & 22xx series have a feature called "iPAQ File Store" allowing to store some data and programs in
the Flash ROM. If you used this option, the hard reset will not cancel the data stored therein. Moreover if this area
become garbled you risk to have to reflash the Rom.
Do not store date exceeding its storage's space.

iPaq 41xx Series
Press and hold the Power button and at the same time press Reset
button in the device's back using the stylus.
Release first the power button , thence the Reset button and you will
see the device to reset and to power on again with original setting.
iPaq rz17xx, rx31xx, rx34xx, rx37xx series
Press and hold the extreme left button (Mobile Media) and the extreme
right button (iTasks) at the same time and use the stylus to press the
reset button at the bottom of the unit. When the screen fades release
the two buttons and button under the stylus. If the unit does not power
on authomatically perform a simple soft reset.
iPaq hx4700
Press and hold calendar and iTask buttons in the front area, while, holding down the buttons, press using the stylus the reset button onthe bottom for about 2 seconds.
iPaq hx2750press and hold button 1 and 4 on the front of the device and at the same time use the stylus to press reset button on the bottom of the ipaq.
iPaq h6300
Press and hold the Power button for about 3 seconds while at the same
time you press by the stylus the reset button on the left side of the unit.
When the screen blanks release both the buttons and wait that the device
powers on.
iPaq rx1950
To perform a clean reset and return you HP iPAQ to factory settings press
and hold the calendar and the iPaq Wireless buttons. While holding down
the buttons lighttly press the Reset button by the stylus for about 2 seconds.
When the HP iPAQ screen begins to fade, release the two first buttons and
then remove the stylus. Plug the device into AC adapter o press Reset button
again to restart unit.
hx2000 series (not h2210)
Press and hold down Calendar and iTask buttons. While holding down these
buttons, use the stylus to press the Reset button on the bottom of the iPAQfor about two seconds. When the Pocket PC screen begins to fade, release thementioned two buttons first, and then remove also the stylus from the Reset.
hw6500 series
To perform a hard reset hold down the Power button and use the stylus to
press the recessed Reset button on the bottom for about five seconds.
The screen fades and the device resets. Once the device resets and the screen
comes back on, release the Power button and remove the stylus from the Reset.
hw69xx series
To perform an Hard(clean) Reset press and hold the Answer/Send, Power,
and End Call buttons. While holding these buttons, by the stylus press the Reset
button on the bottom of the iPAQ until the device restarts.3.When the HP iPAQ restarts, release all of the buttons, Reset button included.

HTC
(qTek 2020-9090-S100 e Xda-Mda-O2-iMate) etc)
Press and hold the power button and use the stylus to press the softreset button at the bottom of the unit at the same time
HTC Wizard(qTek 9100 e i-Mate K-Jam, O2..) etc
Press and hold the Comm.Manager button along with Voice Command button.
While pressing the two button on the device, use the stylus to press and hold
the reset button on the side.
HTC Prophet (Qtek S200,Imate JASmin etc)
Press and hold the CAMERA and COMM MANAGER buttons, and use thestylus to press the RESET button. Holds the CAMERA and COMM MANAGER
buttons until the following message is displayed: “Press Send to restore
factory default or press other key to quit.
HTC TyTN(Hermes,Qtek9600,JasJam etc)
Always switch off the device before to execute a full reset. The full reset
is the Hard Reset of the device an to execute it push and hold at same time
both the SoftKey left and right on the front of the unit while you use the
stylus to press the soft reset button at the bottom of the device.
HTC Universal(qTek 9000 e i-Mate JasJar, Mda Pro..) etc
Press with the fingers the two keys at the same
time and keep them pressed. In addition by the stylus
press the pin into the RESET opening on the back of thedevice. Thence pressing 0 button confirm the Hard resetor, using 'x', choice to not perform the Hard Reset.

(be careful to execute an hard reset under WM 5.0 read device's manual before)

HTC P3300 - P3600
Press and hold left and right buttoni - SOFTKEY and using the stylus
press the RESET command of the device.
Release the stylus, but hold the above buttons and release them when
the screen shows the following message:“Press SEND to restore manufacturer default, or press ..................”
Now you can press the required button (green call icon)

MITAC /-
Mio P350/P550
You can go back to the factory default executing an hard reset from
Start-> Settings-> SysInfo-> Clean Boot
The display will show two methods:
Method 1:It will clean all data. Include Mio Map.Method 2:It will clean all data, except Mio Map.
Mio a701
Make sure that A701 is turned off then press and hold at the same time
the Down Volume button and the End button. When the unit start to
vibrate you can release both buttons. The unit will turn on automatically
and it will show the Setup Wizard. Follow the instructions to complete the
operation
Mio a201
Remove the battery cover by pressing and then sliding the cover off.Use the stylus to slide the ON/OFF switch to the ON (left) position .
(ON to OFF , then OFF to ON)Install the battery and immediately press the Record Button. The screen will show "cold boot" and "loading......"At this time, you must replace the battery cover.
Mio 168
Close all the running programs.
On the rear of the unit slide the battery switch to OFF.
After about 1 minute return the switch on the ON position.
The unit will restart with the original settings.

NEC /-
MobilePro P300
Hold the Power and Record buttons down and insert your stylus into thereset hole.

PALM /-
To perform a soft reset on a Palm (Handspring also) device find the
reset button located in a hole on the back of the device. Using the tool in your stylus, or some other object such as a paperclippress reset button inside the hole.
There is also another form of Reset: Warm Reset A warm reset bypasses any system extensions (such as HackMaster
hacks, operating system patches, and so on) that are loaded on the
device. A warm reset often bypass the "boot loop" error, allowing
you to remove applications, previously installed, causing problems.
All stored data in the device remain unchanged with a warm reset.
To perform a warm reset hold down the top scroll button and press
the reset button inside the hole on the back of your unit.
When in the Palm display you see the general preferences screen,
release the top scroll button.
After a warm reset, you may need to perform a soft reset to get the
device working as normal.
Performing a hard reset you start everything over from scratch.
Be sure to back up your files first.
Perform a hard reset only if a soft or warm reset does not solve
your problem.
To perform a hard reset hold down the power button (Wireless Mode
button on the Treo 600) and press the reset button on the back panel.
When the Palm screen appears, release the power button.
You will get a message informing that you are about to erase all your
data. To continue, press the top scroll button.
To cancel, press any other button. In this case you will get a soft
reset only.
After a hard reset calibrate the digitizer and verify time & date.

QUANTA /-
xda Atom
Press and hold the power button, and then use the stylus topress the soft reset button at the same time.

TREO palmOne /-
Treo650
Remove battery cover and find the Reset hole beside the battery (without
removing the battery). Press and Hold down the Power/End button and
using the stylus press and release the RESET button in the hole.
Release the Power/End button when the Palm Powered logo appearsand when you will be asked if you wish to remove all data press the Up
button to confirm the Hard Reset.

TOSHIBA /-
Toshiba E310
Slide the white switch on the bottom left to the left for a few seconds.The manual says depress the power button at the top with the stylus inthe hole in the back and release the power button.
Toshiba E740
Slide the white switch at the bottom of the device to the right for few seconds, thence slide it back.
Toshiba e800/805
Use the stylus to move to the right the switch under the rubbercover that you find above the wifi switch on the bottom of device. After few seconds reinstate switch to original position.

HWK Release 14/09/2008

2008-09-16T20:14:00.000+07:00

Release Date: 14/09/2008

The Official release is ready in our download area http://sarunasoftware.com.

Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.8.0
----------------------

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)

2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)

3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)

4. Fixed minor bugs.

5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

LG_GSM V 2.0.8.0
-----------------

v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)

2. KP130, KP210, KP215, KP260, KP265 support added.

SAMs V 2.0.8.0
---------------

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)

TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.

SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.

SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.

QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)

COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.

SeDBx v2.0.8.0
---------------

DB2010
1. Added Support for: 36Brown, 49Brown

DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.

DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.

PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.

Many thanks to all those who have supported us!!!

Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk